Use Tips-CM615S

Assembly & Usage

1. Open the water tank lid and fill the water tank with drinking water.Water should not exceed the MAX level. 
2. Place the removable funnel into the funnel support, make sure it is assembled correctly, otherwise the water tank lid can not be closed. Place a paper filter in the funnel. 
3. Add coffee powder into the paper filter. Usually a cup of coffee needs a spoon of coffee powder (you can adjust according to personal taste). Close the water tank lid completely. 
4. Insert the glass carafe onto the warming plate horizontally.
5. Plug the power cord into the outlet. If you want to adjust the coffee strength, you can press the "Strength" button once, and then the "Strength indicator" illuminates in red and the appliance will brew thick coffee. If you do not want to, just follow the following operation to brew normal coffee.
6. Press the "On/Off" button, the "On/Off indicator" illuminates in red then the appliance begins to work.
7. The brewing process can be interrupted by pressing the "On/Off" button at any time. And the appliance will continue brewing once the "On/Off" button is pressed again.
8. Remove out carafe to serve when finish brewing (about one minute later after the coffee stops dripping out.) 
9. When the process is finished, if you do not want to serve immediately, keep the coffee maker be energized, and the coffee can be kept warm on the warming plate. And the appliance will shut off automatically after 40 minutes from the ON/OFF button being activated if it has not been manually disconnected at the completion of brewing. 
10. For an optimum coffee taste, serve it just after brewing.
11. Always turn the appliance off and disconnect the power supply when not use.

1. Set the current time by pressing the "Hour" and "Min" button repetitively, which is 8:10.

2. Press the "Prog" button once and the "Program indicator" blinks in white.

3. Set the auto-start time by pressing the "Hour" and "Min" button repetitively that is 13:00.

4. Press the "Prog" button again, the "Program indicator" illuminates in white solidly. After a while, the display will indicate the current clock. 

5. When the time is due, the On/Off indicator will illuminate in red and the appliance starts brewing.

6. When the process is finished, if you do not want to serve immediately, keep the coffee maker be energized, and the coffee can be kept warm on the warming plate. And the appliance will shut off automatically after 40 minutes from the On/Off button being activated if it has not been manually disconnected at the completion of brewing. 
7. For an optimum coffee taste, serve it just after brewing.